AI SafetyCam Technical Specifications : Help Center

AI SafetyCam Technical Specifications

Modified on Tue, May 12 at 10:36 AM

The following table describes the technical specifications of an AI SafetyCam:

Element	Description
Network data	Global frequency bands
Micro-SD	0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm)
GPS	GPS + AGPS
Road-facing lens	720P HD; wide-angle camera. Field of view (approx): Horizontal: 118° Diagonal: 147°
In-cabin lens	720P HD with integrated IR and adjustable viewing angle. Field of view (approx): Horizontal: 113° Diagonal: 140°
Auxiliary cameras	Ability to connect up to three auxiliary cameras and WiFi
Standby mode	When connected to constant power, the AI safetycam enters standby mode when no movement is detected after a configured length of time. In standby mode the AI safetycam does not record information, but previously recorded videos can be pulled from the AI safetycam.
AI SafetyCam dimensions	4.5" x 2.3" x 1.9" (115 x 60 x 50mm)
Weight	5.3oz (150g)
Casing material	PC2805
Operating temperature	Operating: 32°F to 131°F (0°C to 55°C) Note: In case the operating temperature is out of range, the AI safetycam will not start and will resume operation after reaching normal operating temperature Storage: 14°F to 185°F (-10°C to 85°C)
Protective cover	Protective cover over the SIM card and SD card slots, secured with a safety screw
Power	Hardwire kit is supplied with the AI safetycam for continuous power. Optional to connect through OBD-II power adapter cable
Power consumption	Active: 12V 225mA Standby: 12V 32mA
Storage/memory	128GB SD card is supplied with the AI safetycam
Over the air (OTA) upgrade	Supported
Speaker	Built-in speaker for audible alerts
Event trigger button	Built-in button to capture an unusual event while driving
Processor	Qualcomm® Snapdragon™ Quadcore Processor

PDF copy of the Technical Specifications for the Azuga AI SafetyCam:

Technical Specifications | Azuga AI SafetyCam.pdf